Pcb manufacturer production requirements and precautions

As we know that the size of themany modern electronic products chip components trend to be smaller. In addition to the increasingly small and delicate chip components, the requirements of high sensitivity componentsprocessing environment are becoming more and more demanding. Under this product trend, in addition to strengthening product process supervision and innovation and evolution, FASTPCBA also controls the environment of PCB manufacturerSMTprocessing workshop more strictly.

First, the environmental requirements of the pcb manufacturer workshop

SMT production equipment is a high-precision electromechanical integration equipment. Equipment and process materials have certain requirements for environmental cleanliness, humidity and temperature. In order to ensure the normal operation of the equipment, and reduce environmental damage to components and improve quality, the pcb manufacturer SMT workshop environment has requirementsas below:

1, The power supply

Generally, single-phase AC220 (220±10%, 0/60Hz), three-phase AC380 (380±10%, 50/60Hz), the power of the power supply should be more than double the power consumption.

2, Gas source

According to the requirements of the equipment, the pressure of the air source can be configured. The air source of the factory can be used, or the oil-free compressed air machine can be separately configured. The general pressure is morethan 7kg/cm2. Clean and dry purified air is required, so it is necessary to de-oil, de-dust and de-water the compressed air. Usingair pipes made of stainless steel or pressure-resistant plastic pipes.

3, Exhaustair

Exhaust fans are required for reflow and wave soldering equipment. For a full hot blast stove, the minimum flow rate for the exhaust duct is 500 cubic feet per minute (14.15 m3/min)

4, Temperature and humidity

The environmenttemperature of the production workshop is 23±3°C, generally 17～28°C, and the relative humidity is 45%～70%RH. Settingthe appropriate temperature and humidity meter according to the size of the workshop for timing monitoring and temperaturehumidity adjustmentfacility.

5, Anti-static

Staffsshould wear anti-static clothing, shoes, anti-static bracelets to enter the workshop, anti-static work area should be equipped with anti-static ground, anti-static mat, anti-static packaging bags, turnover boxes, PCB racks and so on.

Second, pcb manufacturer processing considerations

1, solder paste refrigeration

The solder paste should be placed in the refrigerator if it is not used immediately, The temperature is preferably between 5 °C and 10 °C, not below 0 °C. There are many explanations on the usingof solder paste. It’s not necessary to introduce here.

2, Timely replacement easy to lose goodsof the placement machine

In the placement process, due to the aging of the placement machine equipment and the damage of the nozzle and the feeder, the placement machine is liable to incline, and high throwing occurs, reducingproduction efficiency and increasingproduction costs. In the casethat the placement machinecan’t used, it is necessary to carefully check whether the nozzle is clogged, damaged, and whether the feeder is intact.

3, Measuring the furnace temperature

PCB board weldingquality is greatly related toreasonable setting of reflow soldering process parameters. Generally speaking, the furnace temperature test needs to be carried out twice a day, and at leastmeasured once a day to continuously improve the temperature curve and set the temperature curve that best fits the welding product. Don't miss this link for the efficiency of production and cost savings.